Test ID: FPGT
Phenosense Combination HIV Drug Resistance Assay
Secondary ID 
A test code used for billing and in test definitions created prior to November 2011
NY State Approved Indicates the status of NY State approval and if the test is orderable for NY State clients.
Method Name A short description of the method used to perform the test
Polymerase Chain Reaction (PCR)
Reporting Name A shorter/abbreviated version of the Published Name for a test; an abbreviated test name
Aliases Lists additional common names for a test, as an aid in searching
Specimen Type Describes the specimen type needed for testing
Specimen Required Defines the optimal specimen. This field describes the type of specimen required to perform the test and the preferred volume to complete testing. The volume allows automated processing, fastest throughput and, when indicated, repeat or reflex testing.
Draw blood into two 5 mL PPT (pearl top) or EDTA
(lavender top) tube(s). Immediately centrifuge (within 2 hours of
collection) at 1000-1200 x g at room temperature for 10-15
minutes. Do not allow samples to remain in centrifuge after
centrifugation. Remove plasma from cells immediately and
transfer to a plastic screw cap tube. Freeze immediately.
Send 3 mL plasma in a screw-cap vial frozen.
RECOMMENDED:
- Patient's most recent viral load
- Viral load collection date
NOTE: 1. Intended for use only for patients with viral loads greater
than or equal to 500 copies/mL. For best results, viral
loads should be confirmed within two weeks prior to
submission for testing at Monogram.
2. Patient samples submitted <30 days apart are
considered duplicate and will be cancelled.
Specimen Minimum Volume Defines the amount of specimen required to perform an assay once, including instrument and container dead space. Submitting the minimum specimen volume makes it impossible to repeat the test or perform confirmatory or perform reflex testing. In some situations, a minimum specimen volume may result in a QNS (quantity not sufficient) result, requiring a second specimen to be collected.
Reject Due To Identifies specimen types and conditions that may cause the specimen to be rejected
| Specimens other than | Plasma |
| Anticoagulants other than | PPT, EDTA |
| Hemolysis | NA |
| Thawing | Warm reject; Cold reject |
| Lipemia | NA |
| Icteric | NA |
Specimen Stability Information Provides a description of the temperatures required to transport a specimen to the laboratory. Alternate acceptable temperature(s) are also included.
| Specimen Type | Temperature | Time |
|---|---|---|
| Plasma EDTA | Frozen | |
Reference Values Describes reference intervals and additional information for interpretation of test results. May include intervals based on age and sex when appropriate. Intervals are Mayo-derived, unless otherwise designated. If an interpretive report is provided, the reference value field will state this.
A final report will be faxed under separate cover.
Test Performed By: Monogram Biosciences, Inc.
345 Oyster Point Boulevard
South San Francisco, CA 94080
Day(s) and Time(s) Test Performed Outlines the days and times the test is performed. This field reflects the day and time the sample must be in the testing laboratory to begin the testing process and includes any specimen preparation and processing time required before the test is performed. Some tests are listed as continuously performed, which means assays are performed several times during the day.
Monday through Friday
Analytic Time Defines the amount of time it takes the laboratory to setup and perform the test. This is defined in number of days. The shortest interval of time expressed is "same day/1 day," which means the results may be available the same day that the sample is received in the testing laboratory. One day means results are available 1 day after the sample is received in the laboratory.
Maximum Laboratory Time Defines the maximum time from specimen receipt at Mayo Medical Laboratories until the release of the test result
Performing Laboratory Location The location of the laboratory that performs the test
CPT Code Information Provides guidance in determining the appropriate Current Procedural Terminology (CPT) code(s) information for each test or profile. The listed CPT codes reflect Mayo Medical Laboratories interpretation of CPT coding requirements. It is the responsibility of each laboratory to determine correct CPT codes to use for billing.
87900/Infectious agent drug susceptibility phenotype
prediction
87901/Infectious agent genotype analysis by nucleic acid;
reverse transcriptase and protease
87903/Infectious agent phenotype analysis by nucleic acid with
drug resistance tissue culture analysis; first through 10
drugs tested
87904/x11 Each additional drug tested
LOINC® Code Information Provides guidance in determining the Logical Observation Identifiers Names and Codes (LOINC) values for the result codes returned for this test or profile.
| Result ID | Reporting Name | LOINC Code |
|---|---|---|
| Z1043 | Phenosense GT | N/A |
External
link
PDF
document
Excel
document
Word
document