Test ID: F_2
Coagulation Factor II Activity Assay, Plasma
Secondary ID 
A test code used for billing and in test definitions created prior to November 2011
NY State Approved Indicates the status of NY State approval and if the test is orderable for NY State clients.
Useful For Suggests clinical disorders or settings where the test may be helpful
Diagnosing a congenital deficiency (rare) of coagulation factor II
Evaluating acquired deficiencies associated with liver disease or vitamin K deficiency, oral anticoagulant therapy, and antibody-induced deficiencies (eg, in association with lupus-like anticoagulant)
Determining warfarin treatment stabilization in patients with nonspecific inhibitors (ie, lupus anticoagulant)
Determining degree of anticoagulation with warfarin to correlate with level of protein S
Investigation of prolonged prothrombin time or activated partial thromboplastin time
Special Instructions and Forms Describes specimen collection and preparation information, test algorithms, and other information pertinent to test. Also includes pertinent information and consent forms to be used when requesting a particular test
Method Name A short description of the method used to perform the test
Prothrombin Clot-Based Assay
Reporting Name A shorter/abbreviated version of the Published Name for a test; an abbreviated test name
Aliases Lists additional common names for a test, as an aid in searching
FACTOR II ACTIVITY
Factor II, Plasma
Prothrombin
Specimen Type Describes the specimen type needed for testing
Specimen Required Defines the optimal specimen. This field describes the type of specimen required to perform the test and the preferred volume to complete testing. The volume allows automated processing, fastest throughput and, when indicated, repeat or reflex testing.
See Coagulation Studies in Special Instructions.
Specimen Type: Platelet-poor plasma
Collection Container/Tube: Light-blue top (citrate)
Submission Container/Tube: Plastic vial
Specimen Volume: 1 mL
Collection Instructions:
1. Spin down, remove plasma, and spin plasma again.
2. Freeze specimen immediately at < or =-40 degrees C, if possible.
Additional Information:
1. Double-centrifuged specimen is critical for accurate results as platelet contamination may cause spurious results.
2. Patient must not be receiving Coumadin or heparin therapy.
3. Each coagulation assay requested should have its own vial.
4. If priority specimen, mark request form, give reason, and request a call-back.
5. Coagulation testing is highly complex, often requiring the performance of multiple assays and correlation with clinical information. For that reason we suggest ordering Coagulation Consultations.
Specimen Minimum Volume Defines the amount of specimen required to perform an assay once, including instrument and container dead space. Submitting the minimum specimen volume makes it impossible to repeat the test or perform confirmatory or perform reflex testing. In some situations, a minimum specimen volume may result in a QNS (quantity not sufficient) result, requiring a second specimen to be collected.
Reject Due To Identifies specimen types and conditions that may cause the specimen to be rejected
| Hemolysis | Mild OK; Gross reject |
| Lipemia | Mild OK; Gross reject |
| Icterus | Mild OK; Gross reject |
| Other | NA |
Specimen Stability Information Provides a description of the temperatures required to transport a specimen to the laboratory. Alternate acceptable temperature(s) are also included.
| Specimen Type | Temperature | Time |
|---|---|---|
| Plasma Na Cit | Frozen | 14 days |
Clinical Information Discusses physiology, pathophysiology, and general clinical aspects, as they relate to a laboratory test
Factor II (prothrombin) is a vitamin K-dependent serine protease synthesized in liver. It participates in the final common pathway of coagulation, as the substrate for the prothrombinase enzyme complex. Prothrombin is the precursor of thrombin (IIa) which converts fibrinogen to fibrin. Plasma biological half-life is about 3 days.
Deficiency of factor II may cause prolonged prothrombin time and activated partial thromboplastin time. Deficiency may result in a bleeding diathesis.
Reference Values Describes reference intervals and additional information for interpretation of test results. May include intervals based on age and sex when appropriate. Intervals are Mayo-derived, unless otherwise designated. If an interpretive report is provided, the reference value field will state this.
Adults: 75-145%
Normal, full-term newborn infants or healthy premature infants may have decreased levels (> or =25%) which may remain below adult levels for > or =180 days postnatal.*
*See Pediatric Hemostasis References in Coagulation Studies in Special Instructions.
Interpretation Provides information to assist in interpretation of the test results
Liver disease, vitamin K deficiency, or warfarin anticoagulation can cause decreased factor II activity.
Homozygotes generally have levels of <25%
Heterozygotes generally have levels of <50%
Normal newborn infants may have levels of 25% to 50%
Cautions Discusses conditions that may cause diagnostic confusion, including improper specimen collection and handling, inappropriate test selection, and interfering substances
Factor II is 1 of the last vitamin K-dependent coagulation factors to decrease after starting warfarin therapy and 1 of the last to return to normal when anticoagulation is discontinued. It may take 10 to 14 days for a return to baseline levels.
Clinical Reference Provides recommendations for further in-depth reading of a clinical nature
1. Lancellotti S, De Cristofaro R: Congenital prothrombin deficiency. Semin Thromb Hemost 2009 Jun;35(4):367-381
2. Peyvandi F, Bolton-Maggs PH, Batorova A, De Moerloose P: Rare bleeding disorders. Haemophilia 2012 Jul;18 Suppl 4:148-153
3. Girolami A, Scandellari R, Scapin M, Vettore S: Congenital bleeding disorders of the vitamin K-dependent clotting factors. Vitam Horm 2008;78:281-374
4. Brenner B, Kuperman AA, Watzka M, Oldenburg J: Vitamin K-dependent coagulation factors deficiency. Semin Thromb Hemost 2009 Jun;35(4):439-446
Method Description Describes how the test is performed and provides a method-specific reference
The factor II assay is performed on the Beckman Coulter ACL TOP using the prothrombin time (PT) method and a factor deficient substrate. Patient plasma is combined and incubated with a factor II deficient substrate (normal plasma depleted of factor II by immunoadsorption). After a specified incubation time, a PT reagent is added to trigger the coagulation process in the mixture. At which time, the time to clot formation is measured optically at a wavelength of 671 nm.(Owen CA Jr, Bowie EJW, Thompson JH Jr: Diagnosis of Bleeding Disorders. Second edition. Boston, MA, Little, Brown and Company, 1975)
Day(s) and Time(s) Test Performed Outlines the days and times the test is performed. This field reflects the day and time the sample must be in the testing laboratory to begin the testing process and includes any specimen preparation and processing time required before the test is performed. Some tests are listed as continuously performed, which means assays are performed several times during the day.
Monday through Friday
Analytic Time Defines the amount of time it takes the laboratory to setup and perform the test. This is defined in number of days. The shortest interval of time expressed is "same day/1 day," which means the results may be available the same day that the sample is received in the testing laboratory. One day means results are available 1 day after the sample is received in the laboratory.
Maximum Laboratory Time Defines the maximum time from specimen receipt at Mayo Medical Laboratories until the release of the test result
Specimen Retention Time Outlines the length of time after testing that a specimen is kept in the laboratory before it is discarded
Performing Laboratory Location The location of the laboratory that performs the test
Test Classification Provides information regarding the medical device classification for laboratory test kits and reagents. Tests may be classified as cleared or approved by the US Food and Drug Administration (FDA) and used per manufacturer's instructions, or as products that do not undergo full FDA review and approval, and are then labeled as an Analyte Specific Reagent (ASR), Investigation Use Only (IUO) product, or a Research Use Only (RUO) product.
CPT Code Information Provides guidance in determining the appropriate Current Procedural Terminology (CPT) code(s) information for each test or profile. The listed CPT codes reflect Mayo Medical Laboratories interpretation of CPT coding requirements. It is the responsibility of each laboratory to determine correct CPT codes to use for billing.
85210
LOINC® Code Information Provides guidance in determining the Logical Observation Identifiers Names and Codes (LOINC) values for the result codes returned for this test or profile.
| Result ID | Reporting Name | LOINC Code |
|---|---|---|
| F_2 | Coag Factor II Assay, P | 3289-6 |
External
link
PDF
document
Excel
document
Word
document