Test ID: CROMU
Chromium for Occupational Monitoring, Urine
Secondary ID 
A test code used for billing and in test definitions created prior to November 2011
NY State Approved Indicates the status of NY State approval and if the test is orderable for NY State clients.
Useful For Suggests clinical disorders or settings where the test may be helpful
Screening for occupational exposure
Profile Information A profile is a group of laboratory tests that are ordered and performed together under a single Mayo Test ID. Profile information lists the test performed, inclusive of the test fee, when a profile is ordered and includes reporting names and individual availability.
| Test ID | Reporting Name | Available Separately | Always Performed |
|---|---|---|---|
| CROM | Chromium, Random, U | No | Yes |
| CDCR | Creatinine Conc | No | Yes |
Special Instructions and Forms Describes specimen collection and preparation information, test algorithms, and other information pertinent to test. Also includes pertinent information and consent forms to be used when requesting a particular test
Method Name A short description of the method used to perform the test
CROM/29512: Dynamic Reaction Cell-Inductively Coupled Plasma-Mass Spectometry (DRC-ICP-MS)
CDCR/7243: Enzymatic Colorimetric Assay
Reporting Name A shorter/abbreviated version of the Published Name for a test; an abbreviated test name
Aliases Lists additional common names for a test, as an aid in searching
Cr (Chromium)
Specimen Type Describes the specimen type needed for testing
Specimen Required Defines the optimal specimen. This field describes the type of specimen required to perform the test and the preferred volume to complete testing. The volume allows automated processing, fastest throughput and, when indicated, repeat or reflex testing.
Collection Container/Tube: Clean, plastic urine collection container
Submission Container/Tube: Plastic, 6-mL tube (Supply T465) or a clean, plastic aliquot container with no metal cap or glued insert
Specimen Volume: 6 mL
Collection Instructions:
1. Collect a random urine specimen.
2. See Metals Analysis-Collection and Transport in Special Instructions for complete instructions.
Additional Information: High concentrations of gadolinium and iodine are known to interfere with most metals tests. If either gadolinium- or iodine-containing contrast media has been administered, a specimen should not be collected for 96 hours.
Specimen Minimum Volume Defines the amount of specimen required to perform an assay once, including instrument and container dead space. Submitting the minimum specimen volume makes it impossible to repeat the test or perform confirmatory or perform reflex testing. In some situations, a minimum specimen volume may result in a QNS (quantity not sufficient) result, requiring a second specimen to be collected.
Reject Due To Identifies specimen types and conditions that may cause the specimen to be rejected
| Hemolysis | NA |
| Lipemia | NA |
| Icterus | NA |
| Other | NA |
Specimen Stability Information Provides a description of the temperatures required to transport a specimen to the laboratory. Alternate acceptable temperature(s) are also included.
| Specimen Type | Temperature | Time |
|---|---|---|
| Urine | Refrigerated (preferred) | 28 days |
| Ambient | 28 days | |
| Frozen | 28 days |
Clinical Information Discusses physiology, pathophysiology, and general clinical aspects, as they relate to a laboratory test
Chromium (Cr) has an atomic mass of 51.996, atomic number 24, and valences ranging from 2(-) to 6(+). Hexavalent chromium, Cr(+6), and trivalent chromium, Cr(+3), are the 2 most prevalent forms. Cr(+3) is the only oxidation state present under normal physiologic conditions. Cr(+6) is widely used in industry to make chromium alloys including stainless steel pigments and electroplated coatings. Cr(+6), a known carcinogen, is rapidly metabolized to Cr(+3). Cr(+3) is the only form present in human urine.
Reference Values Describes reference intervals and additional information for interpretation of test results. May include intervals based on age and sex when appropriate. Intervals are Mayo-derived, unless otherwise designated. If an interpretive report is provided, the reference value field will state this.
Chromium/creatinine ratio: <10.0 mcg/g creatinine
Interpretation Provides information to assist in interpretation of the test results
The National Institute for Occupational Safety and Health (NIOSH) draft document on occupational exposure reviews the data supporting use of urine to assess chromium exposure.(1) They recommend a Biological Exposure Index of 10 mcg/g creatinine and 30 mcg/g creatinine for the increase in urinary chromium concentrations during a work shift and at the end of shift at the end of the workweek, respectively (Section 3.3.1).
Cautions Discusses conditions that may cause diagnostic confusion, including improper specimen collection and handling, inappropriate test selection, and interfering substances
Normal specimens have extremely low levels of creatinine; elevated results could easily be a result of external contamination. Precautions must be taken to ensure the specimen is not contaminated. Metal-free urine collection procedures must be followed. Refrigeration is preferred over chemical methods of preservation.
High concentrations of gadolinium and iodine are known to interfere with most metals tests. If either gadolinium or iodine-containing contrast media has been administered, a specimen should not be collected for 96 hours.
Clinical Reference Provides recommendations for further in-depth reading of a clinical nature
Centers for Disease Control and Prevention: NIOSH Draft Criteria Document Update: Occupational Exposure to Hexavalent Chromium September 2008. DRAFT-Criteria-Document-Update-Occupational-Exposure-to-Hexavalent-Chromium. Retrieved 2/27/09. Available at http://www.cdc.gov/niosh/review/public/144/
Method Description Describes how the test is performed and provides a method-specific reference
This assay is performed on an inductively coupled plasma-mass spectrometer in dynamic reaction cell mode. Calibrating standards and blanks are diluted with an aqueous acidic diluent containing internal standard(s). Quality control specimens and patient samples are diluted in an identical manner. In turn, all diluted blanks, calibrating standards, quality control specimens, and patient specimens are aspirated into a pneumatic nebulizer and the resulting aerosol directed to the hot plasma discharge by a flow of argon. In the annular plasma the aerosol is vaporized, atomized, then ionized. The ionized gases plus neutral species formed in the annular plasma space are aspirated from the plasma through an orifice into a quadrupole mass spectrometer. The mass range from 1 amu to 263 amu is rapidly scanned multiple times and ion counts tabulated for each mass of interest. Instrument response is defined by the linear relationship of analyte concentration vs. ion count ratio (analyte ion count/internal standard ion count). Analyte concentrations are derived by reading the ion count ratio for each mass of interest and determining the concentration from the response line. (Unpublished Mayo method)
Creatinine is measured using an enzymatic method based on the determination of sarcosine from creatinine with the aid of creatininase, creatinase, and sarcosine oxidase. The liberated hydrogen peroxide is measured via a modified Trinder reaction using a colorimetric indicator. (Package insert: Roche Diagnostics, Indianapolis IN, 2004)
Day(s) and Time(s) Test Performed Outlines the days and times the test is performed. This field reflects the day and time the sample must be in the testing laboratory to begin the testing process and includes any specimen preparation and processing time required before the test is performed. Some tests are listed as continuously performed, which means assays are performed several times during the day.
Tuesday, Friday; Afternoon and Evening
Analytic Time Defines the amount of time it takes the laboratory to setup and perform the test. This is defined in number of days. The shortest interval of time expressed is "same day/1 day," which means the results may be available the same day that the sample is received in the testing laboratory. One day means results are available 1 day after the sample is received in the laboratory.
Maximum Laboratory Time Defines the maximum time from specimen receipt at Mayo Medical Laboratories until the release of the test result
Specimen Retention Time Outlines the length of time after testing that a specimen is kept in the laboratory before it is discarded
Performing Laboratory Location The location of the laboratory that performs the test
Test Classification Provides information regarding the medical device classification for laboratory test kits and reagents. Tests may be classified as cleared or approved by the US Food and Drug Administration (FDA) and used per manufacturer's instructions, or as products that do not undergo full FDA review and approval, and are then labeled as an Analyte Specific Reagent (ASR), Investigation Use Only (IUO) product, or a Research Use Only (RUO) product.
CPT Code Information Provides guidance in determining the appropriate Current Procedural Terminology (CPT) code(s) information for each test or profile. The listed CPT codes reflect Mayo Medical Laboratories interpretation of CPT coding requirements. It is the responsibility of each laboratory to determine correct CPT codes to use for billing.
82495
LOINC® Code Information Provides guidance in determining the Logical Observation Identifiers Names and Codes (LOINC) values for the result codes returned for this test or profile.
| Result ID | Reporting Name | LOINC Code |
|---|---|---|
| CDCR | Creatinine Conc | 35674-1 |
| 26570 | Chromium, Random, U | 5623-4 |
| 29512 | Chromium/Creatinine Ratio | 13464-3 |
External
link
PDF
document
Excel
document
Word
document