Test ID: TOBT
Tobramycin, Trough, Serum
Secondary ID 
A test code used for billing and in test definitions created prior to November 2011
NY State Approved Indicates the status of NY State approval and if the test is orderable for NY State clients.
Useful For Suggests clinical disorders or settings where the test may be helpful
Monitoring adequate clearance of tobramycin near the end of a dosing cycle
Method Name A short description of the method used to perform the test
Enzyme-Multiplied Immunoassay Technique (EMIT)
Reporting Name A shorter/abbreviated version of the Published Name for a test; an abbreviated test name
Aliases Lists additional common names for a test, as an aid in searching
Antimicrobial Assay
Antimicrobial Assay, Tobramycin
Nebcin (Tobramycin Sulfate Injection)
Tobramycin, Trough, Serum
Specimen Type Describes the specimen type needed for testing
Specimen Required Defines the optimal specimen. This field describes the type of specimen required to perform the test and the preferred volume to complete testing. The volume allows automated processing, fastest throughput and, when indicated, repeat or reflex testing.
Collection Container/Tube: Red top
Submission Container/Tube: Plastic vial
Specimen Volume: 1 mL
Collection Instructions:
1. Draw blood no more than 30 minutes before next scheduled dose.
2. Spin down within 2 hours of draw.
Specimen Minimum Volume Defines the amount of specimen required to perform an assay once, including instrument and container dead space. Submitting the minimum specimen volume makes it impossible to repeat the test or perform confirmatory or perform reflex testing. In some situations, a minimum specimen volume may result in a QNS (quantity not sufficient) result, requiring a second specimen to be collected.
Reject Due To Identifies specimen types and conditions that may cause the specimen to be rejected
| Hemolysis | Mild OK; Gross reject |
| Lipemia | Mild OK; Gross reject |
| Icterus | Mild OK; Gross reject |
| Other | Serum gel tube |
Specimen Stability Information Provides a description of the temperatures required to transport a specimen to the laboratory. Alternate acceptable temperature(s) are also included.
| Specimen Type | Temperature | Time |
|---|---|---|
| Serum Red | Frozen | 14 days |
Clinical Information Discusses physiology, pathophysiology, and general clinical aspects, as they relate to a laboratory test
Tobramycin is an antibiotic used to treat life-threatening blood infections by gram-negative bacilli, particularly Citrobacter freundii, Enterobacter (all species), Escherichia coli, Klebsiella pneumoniae, Proteus mirabilis, Providencia stuartii, Pseudomonas aeruginosa, and Serratia species. It is often used in combination with beta-lactam therapy.
A tobramycin minimum inhibitory concentration (MIC) of <4.0 mcg/mL is considered susceptible for gram-negative bacilli, while a MIC of >8.0 mcg/mL is considered resistant.
Toxicities include ototoxicity and nephrotoxicity. This risk is enhanced in presence of other ototoxic or nephrotoxic drugs. Monitoring of serum levels, renal function, and symptoms consistent with ototoxicity is important. For longer durations of use, audiology and vestibular testing should be considered at baseline and periodically during therapy.
Reference Values Describes reference intervals and additional information for interpretation of test results. May include intervals based on age and sex when appropriate. Intervals are Mayo-derived, unless otherwise designated. If an interpretive report is provided, the reference value field will state this.
<2.0 mcg/mL
Interpretation Provides information to assist in interpretation of the test results
Goal levels depend on the type of infection being treated. Goal trough levels should be <2.0 mcg/mL for conventional (nonpulse) dosing. Prolonged exposure to trough levels exceeding 2.0 mcg/mL may lead to toxicity.
Clinical Reference Provides recommendations for further in-depth reading of a clinical nature
1. Hammett-Stabler CA, Johns T: Laboratory guidelines for monitoring of antimicrobial drugs. Clin Chem 1998;44(5):1129-1140
2. Moyer TP: Therapeutic drug monitoring. In Tietz Textbook of Clinical Chemistry, Fourth edition. Edited by CA Burtis, ER Ashwood, Philadelphia, WB Saunders Company, 2006
3. Wilson JW, Estes LL: Mayo Clinic Antimicrobial Therapy Quick Guide. Mayo Clinic Scientific Press and Informa Healthcare USA, 2008
Method Description Describes how the test is performed and provides a method-specific reference
This assay is performed by enzyme-multiplied immunoassay technique (EMIT) using an Olympus analyzer. The EMIT assay is a homogeneous enzyme immunoassay technique used for the analysis of specific compounds in biological fluids. The assay is based on competition for antibody binding sites between drug in the sample and drug labeled with the enzyme glucose-6-phosphate dehydrogenase (G6P-DH). Enzyme activity decreases upon binding to the antibody, so the drug concentration in the sample can be measured in terms of enzyme activity. Active enzyme converts oxidized nicotinamide adenine dinucleotide (NAD) to NADH, resulting in an absorbance change that is measured spectrophotometrically. Endogenous serum G6P-DH does not interfere, because the coenzyme functions only with the bacterial enzyme employed in the assay.(Package insert: EMIT Tobramycin Assay, Syva Company, Siemens Healthcare Diagnostics, Newark, DE, March 2008)
Day(s) and Time(s) Test Performed Outlines the days and times the test is performed. This field reflects the day and time the sample must be in the testing laboratory to begin the testing process and includes any specimen preparation and processing time required before the test is performed. Some tests are listed as continuously performed, which means assays are performed several times during the day.
Monday through Sunday; Varies
Analytic Time Defines the amount of time it takes the laboratory to setup and perform the test. This is defined in number of days. The shortest interval of time expressed is "same day/1 day," which means the results may be available the same day that the sample is received in the testing laboratory. One day means results are available 1 day after the sample is received in the laboratory.
Maximum Laboratory Time Defines the maximum time from specimen receipt at Mayo Medical Laboratories until the release of the test result
Specimen Retention Time Outlines the length of time after testing that a specimen is kept in the laboratory before it is discarded
Performing Laboratory Location The location of the laboratory that performs the test
Test Classification Provides information regarding the medical device classification for laboratory test kits and reagents. Tests may be classified as cleared or approved by the US Food and Drug Administration (FDA) and used per manufacturer's instructions, or as products that do not undergo full FDA review and approval, and are then labeled as an Analyte Specific Reagent (ASR), Investigation Use Only (IUO) product, or a Research Use Only (RUO) product.
CPT Code Information Provides guidance in determining the appropriate Current Procedural Terminology (CPT) code(s) information for each test or profile. The listed CPT codes reflect Mayo Medical Laboratories interpretation of CPT coding requirements. It is the responsibility of each laboratory to determine correct CPT codes to use for billing.
80200
LOINC® Code Information Provides guidance in determining the Logical Observation Identifiers Names and Codes (LOINC) values for the result codes returned for this test or profile.
| Result ID | Reporting Name | LOINC Code |
|---|---|---|
| 81594 | Tobramycin, Trough, S | In Process |
External
link
PDF
document
Excel
document
Word
document