Test ID: IMMG
Immunoglobulins (IgG, IgA, and IgM), Serum
Secondary ID 
A test code used for billing and in test definitions created prior to November 2011
NY State Approved Indicates the status of NY State approval and if the test is orderable for NY State clients.
Useful For Suggests clinical disorders or settings where the test may be helpful
Detecting or monitoring of monoclonal gammopathies and immune deficiencies
Method Name A short description of the method used to perform the test
Nephelometry
Reporting Name A shorter/abbreviated version of the Published Name for a test; an abbreviated test name
Aliases Lists additional common names for a test, as an aid in searching
IgA (Immunoglobulins)
IgA, IgG, IgM (Immunoglobulins A, G, M)
IgG (Immunoglobulins)
IgG, A, and M MMLNE only
IgM (Immunoglobulins)
Immune Competence
Immunoglobulin Panel, Serum
Immunoglobulins, Quantitative
Macroglobulins
Quant Ig, Serum
Immunoglobulin G (IgG)
Immunoglobulin A (IgA)
Immunoglobulin M (IgM)
Specimen Type Describes the specimen type needed for testing
Specimen Required Defines the optimal specimen. This field describes the type of specimen required to perform the test and the preferred volume to complete testing. The volume allows automated processing, fastest throughput and, when indicated, repeat or reflex testing.
Container/Tube:
Preferred: Red top
Acceptable: Serum gel
Specimen Volume: 1 mL
Specimen Minimum Volume Defines the amount of specimen required to perform an assay once, including instrument and container dead space. Submitting the minimum specimen volume makes it impossible to repeat the test or perform confirmatory or perform reflex testing. In some situations, a minimum specimen volume may result in a QNS (quantity not sufficient) result, requiring a second specimen to be collected.
Reject Due To Identifies specimen types and conditions that may cause the specimen to be rejected
| Hemolysis | Mild OK; Gross OK |
| Lipemia | Mild OK; Gross reject |
| Icterus | Mild OK; Gross OK |
| Other | NA |
Specimen Stability Information Provides a description of the temperatures required to transport a specimen to the laboratory. Alternate acceptable temperature(s) are also included.
| Specimen Type | Temperature | Time |
|---|---|---|
| Serum | Refrigerated (preferred) | 28 days |
| Ambient | 28 days | |
| Frozen | 28 days |
Clinical Information Discusses physiology, pathophysiology, and general clinical aspects, as they relate to a laboratory test
The gamma globulin band as seen in conventional serum protein electrophoresis consists of 5 immunoglobulins. In normal serum, about 80% is immunoglobulin G (IgG), 15% is immunoglobulin A (IgA), 5% is immunoglobulin M (IgM), 0.2% is immunoglobulin D (IgD), and a trace is immunoglobulin E (IgE).
Elevations of IgG, IgA, and IgM may be due to polyclonal immunoglobulin production.
Monoclonal gammopathies of all types may lead to a spike in the gamma globulin zone seen on serum protein electrophoresis. Monoclonal elevations of IgG, IgA, IgD, and IgE characterize multiple myeloma. Monoclonal elevations of IgM occur in macroglobulinemia.
Decreased immunoglobulin levels are found in patients with congenital deficiencies.
Reference Values Describes reference intervals and additional information for interpretation of test results. May include intervals based on age and sex when appropriate. Intervals are Mayo-derived, unless otherwise designated. If an interpretive report is provided, the reference value field will state this.
IgG
0-<5 months: 100-334 mg/dL
5-<9 months: 164-588 mg/dL
9-<15 months: 246-904 mg/dL
15-<24 months: 313-1,170 mg/dL
2-<4 years: 295-1,156 mg/dL
4-<7 years: 386-1,470 mg/dL
7-<10 years: 462-1,682 mg/dL
10-<13 years: 503-1,719 mg/dL
13-<16 years: 509-1,580 mg/dL
16-<18 years: 487-1,327 mg/dL
> or =18 years: 767-1,590 mg/dL
IgA
0-<5 months: 7-37 mg/dL
5-<9 months: 16-50 mg/dL
9-<15 months: 27-66 mg/dL
15-<24 months: 36-79 mg/dL
2-<4 years: 27-246 mg/dL
4-<7 years: 29-256 mg/dL
7-<10 years: 34-274 mg/dL
10-<13 years: 42-295 mg/dL
13-<16 years: 52-319 mg/dL
16-<18 years: 60-337 mg/dL
> or =18 years: 61-356 mg/dL
IgM
0-<5 months: 26-122 mg/dL
5-<9 months: 32-132 mg/dL
9-<15 months: 40-143 mg/dL
15-<24 months: 46-152 mg/dL
2-<4 years: 37-184 mg/dL
4-<7 years: 37-224 mg/dL
7-<10 years: 38-251 mg/dL
10-<13 years: 41-255 mg/dL
13-<16 years: 45-244 mg/dL
16-<18 years: 49-201 mg/dL
> or =18 years: 37-286 mg/dL
Interpretation Provides information to assist in interpretation of the test results
Increased serum immunoglobulin concentrations occur due to polyclonal or oligoclonal immunoglobulin proliferation in hepatic disease (hepatitis, liver cirrhosis), connective tissue diseases, acute and chronic infections, as well as in the cord blood of neonates with intrauterine and perinatal infections.
Elevations of immunoglobulin G (IgG), immunoglobulin A (IgA), or immunoglobulin M (IgM) may occur in monoclonal gammopathies such as multiple myeloma (IgG, IgA), macroglobulinemia (IgM), primary systemic amyloidosis, monoclonal gammopathy of undetermined significance, and related disorders.
Decreased levels are found in patients with primary or secondary immune deficiencies.
Cautions Discusses conditions that may cause diagnostic confusion, including improper specimen collection and handling, inappropriate test selection, and interfering substances
Electrophoresis is usually required to interpret an elevated immunoglobulin class as polyclonal versus monoclonal. Immunofixation is usually required to characterize a monoclonal protein.
If there is a discrete M-peak, the monoclonal protein can be monitored with quantitative immunoglobulins. If immunoglobulin quantitation is used to monitor the size of a monoclonal protein that is contained in a background of polyclonal immunoglobulins, changes in the immunoglobulin quantitation may reflect changes in the background immunoglobulins. In these situations, serum protein electrophoresis should therefore be used to monitor the monoclonal protein.
Clinical Reference Provides recommendations for further in-depth reading of a clinical nature
1. Webster ADB: Laboratory Investigation of primary deficiency of the lymphoid system. In Clinics in Immunology and Allergy. Vol. 5. 3rd edition. Philadelphia, WB Saunders Company, 1985, pp 447-468
2. Pinching AJ: Laboratory investigation of secondary immunodeficiency. In Clinics in Immunology and Allergy. Vol. 5. 3rd edition. Philadelphia, WB Saunders Company, 1985, pp 469-490
3. Dispenzieri A, Gertz MA, Kyle RA: Distribution of diseases associated with moderate polyclonal gammopathy in patients seen at Mayo Clinic during 1991. Blood 1997;90:353
4. Kyle RA, Greipp PR: The laboratory investigation of monoclonal gammopathies. Mayo Clin Proc 1978;53:719-739
5. Ballow M, O'Neil KM: Approach to the patient with recurrent infections. In Allergy: Principles and Practice. Vol. 2. 4th edition. Edited by E Middleton Jr, CE Reed, EF Ellis, et al. St. Louis, MO, Mosby-Year Book, Inc., 1993, pp 1027-1058
6. Kyle RA: Detection of quantitation of monoclonal proteins. Clin Immunol Newsletter 1990;10:84-86
Method Description Describes how the test is performed and provides a method-specific reference
Nephelometry (Instruction manual: Siemens Nephelometer II Operations Siemens, Inc., Newark, DE).
Day(s) and Time(s) Test Performed Outlines the days and times the test is performed. This field reflects the day and time the sample must be in the testing laboratory to begin the testing process and includes any specimen preparation and processing time required before the test is performed. Some tests are listed as continuously performed, which means assays are performed several times during the day.
Monday through Saturday; Continuously until 3 p.m.
Analytic Time Defines the amount of time it takes the laboratory to setup and perform the test. This is defined in number of days. The shortest interval of time expressed is "same day/1 day," which means the results may be available the same day that the sample is received in the testing laboratory. One day means results are available 1 day after the sample is received in the laboratory.
Maximum Laboratory Time Defines the maximum time from specimen receipt at Mayo Medical Laboratories until the release of the test result
Specimen Retention Time Outlines the length of time after testing that a specimen is kept in the laboratory before it is discarded
Performing Laboratory Location The location of the laboratory that performs the test
Test Classification Provides information regarding the medical device classification for laboratory test kits and reagents. Tests may be classified as cleared or approved by the US Food and Drug Administration (FDA) and used per manufacturer's instructions, or as products that do not undergo full FDA review and approval, and are then labeled as an Analyte Specific Reagent (ASR), Investigation Use Only (IUO) product, or a Research Use Only (RUO) product.
CPT Code Information Provides guidance in determining the appropriate Current Procedural Terminology (CPT) code(s) information for each test or profile. The listed CPT codes reflect Mayo Medical Laboratories interpretation of CPT coding requirements. It is the responsibility of each laboratory to determine correct CPT codes to use for billing.
82784 x 3
LOINC® Code Information Provides guidance in determining the Logical Observation Identifiers Names and Codes (LOINC) values for the result codes returned for this test or profile.
| Result ID | Reporting Name | LOINC Code |
|---|---|---|
| IGA | Immunoglobulin A (IgA), S | 2458-8 |
| IGM | Immunoglobulin M (IgM), S | 2472-9 |
| IGG | Immunoglobulin G (IgG), S | 2465-3 |
External
link
PDF
document
Excel
document
Word
document