Manganese, 24 Hour, Urine
NY State Approved Indicates the status of NY State approval and if the test is orderable for NY State clients.
Monitoring manganese exposure
Genetics Test Information Provides information that may help with selection of the correct test or proper submission of the test request
Special Instructions and Forms Describes specimen collection and preparation information, test algorithms, and other information pertinent to test. Also includes pertinent information and consent forms to be used when requesting a particular test
Dynamic Reaction Cell-Inductively Coupled Plasma-Mass Spectrometry (DRC-ICP-MS)
Reporting Name A shorter/abbreviated version of the Published Name for a test; an abbreviated test name
Manganese, 24 Hr, U
Specimen Type Describes the specimen type needed for testing
Specimen Required Defines the optimal specimen. This field describes the type of specimen required to perform the test and the preferred volume to complete testing. The volume allows automated processing, fastest throughput and, when indicated, repeat or reflex testing.
Collection Container/Tube: Clean, plastic urine container with no metal cap or glued insert
Submission Container/Tube: Plastic, 10-mL urine tube (Supply T068) or clean, plastic aliquot container with no metal cap or glued insert
Specimen Volume: 10 mL
1. Collect urine for 24 hours.
2. No preservative.
3. See Metals Analysis-Collection and Transport in Special Instructions for complete instructions.
4. Refrigerate specimen within 4 hours of completion of 24-hour collection.
1. 24-Hour volume is required.
2. See Urine Preservatives in Special Instructions for multiple collections.
3. High concentrations of gadolinium and iodine are known to interfere with most metals tests. If gadolinium- or iodine-containing contrast media has been administered, a specimen should not be collected for 96 hours.
Urine Preservative Collection Options
50% Acetic Acid
Specimen Minimum Volume Defines the amount of specimen required to perform an assay once, including instrument and container dead space. Submitting the minimum specimen volume makes it impossible to repeat the test or perform confirmatory or perform reflex testing. In some situations, a minimum specimen volume may result in a QNS (quantity not sufficient) result, requiring a second specimen to be collected.
Specimen Stability Information Provides a description of the temperatures required to transport a specimen to the laboratory. Alternate acceptable temperature(s) are also included.
|Urine||Refrigerated (preferred)||28 days|
Clinical Information Discusses physiology, pathophysiology, and general clinical aspects, as they relate to a laboratory test
Manganese (Mn) is an essential trace element with many industrial uses. Manganese is the 12th most abundant element in the earth's crust and is used predominantly in the production of steel. These industrial processes cause elevated environmental exposures to airborne manganese dust and fumes, which in turn have lead to well-documented cases of neurotoxicity among exposed workers. Mining and iron and steel production have been implicated as sources of exposure.
Inhalation is the primary source of entry for manganese toxicity. Signs of toxicity may appear quickly or not at all; neurological symptoms are rarely reversible. Manganese toxicity is generally recognized to progress through 3 stages. Levy describes these stages. "The first stage is a prodrome of malaise, somnolence, apathy, emotional lability, sexual dysfunction, weakness, lethargy, anorexia, and headaches. If there is continued exposure, progression to a second stage may occur, with psychological disturbances, including impaired memory and judgment, anxiety, and sometimes psychotic manifestations such as hallucinations. The third stage consists of progressive bradykinesia, dysarthrian axial and extremity dystonia, paresis, gait disturbances, cogwheel rigidity, intention tremor, impaired coordination, and a mask-like face. Many of those affected may be permanently and completely disabled."(1)
Few cases of manganese deficiency or toxicity due to ingestion have been documented. Only 1% to 3% manganese is absorbed via ingestion, while most of the remaining manganese is excreted in the feces. As listed in the United States National Agriculture Library, manganese adequate intake is 1.6 mg/day to 2.3 mg/day for adults. This level of intake is easily achieved, without supplementation, by a diverse diet including fruits and vegetables, which have higher amounts of manganese than other food types. Patients on a long-term parenteral nutrition should receive manganese supplementation and should be monitored to ensure that circulatory levels of manganese are appropriate.
Reference Values Describes reference intervals and additional information for interpretation of test results. May include intervals based on age and sex when appropriate. Intervals are Mayo-derived, unless otherwise designated. If an interpretive report is provided, the reference value field will state this.
0-15 years: not established
> or =16 years: 0.1-1.2 mcg/specimen
Manganese in urine represents the excretion of excess manganese from the body. Elevated levels may indicate occupational exposure or excessive nutritional intake.
Specimens from normal individuals have very low levels of manganese.
Cautions Discusses conditions that may cause diagnostic confusion, including improper specimen collection and handling, inappropriate test selection, and interfering substances
Normal specimens have extremely low levels of manganese; therefore, elevated results could easily be a result of external contamination. Precautions must be taken to ensure the specimen is not contaminated. Metal-free urine collection procedures must be followed.
High concentrations of gadolinium and iodine are known to interfere with most metals tests. If either gadolinium- or iodine-containing contrast media has been administered, a specimen should not be collected for 96 hours.
Clinical Reference Provides recommendations for further in-depth reading of a clinical nature
1. Levy BS, Nassetta WJ: Neurologic effects of manganese in humans: A review. Int J Occup Environ Health Apr/Jun 2003;9(2):153-163
2. Paschal DC, Ting BG, Morrow JC, et. at. Trace metals in urine of United States residents: Reference range concentrations. Environmental Research 1998;7:53-59
Method Description Describes how the test is performed and provides a method-specific reference
This assay is performed on an inductively coupled plasma-mass spectrometer in dynamic reaction cell mode. Calibrating standards and blanks are diluted with an aqueous acidic diluent containing internal standard(s). Quality control specimens and patient samples are diluted in an identical manner. In turn, all diluted blanks, calibrating standards, quality control specimens, and patient specimens are aspirated into a pneumatic nebulizer and the resulting aerosol directed to the hot plasma discharge by a flow of argon. In the annular plasma the aerosol is vaporized, atomized, then ionized. The ionized gases plus neutral species formed in the annular plasma space are aspirated from the plasma through an orifice into a quadrupole mass spectrometer. The mass range from 1 amu to 263 amu is rapidly scanned multiple times and ion counts tabulated for each mass of interest. Instrument response is defined by the linear relationship of analyte concentration vs. ion count ratio (analyte ion count/internal standard ion count). Analyte concentrations are derived by reading the ion count ratio for each mass of interest and determining the concentration from the response line. (Unpublished Mayo method)
Day(s) and Time(s) Test Performed Outlines the days and times the test is performed. This field reflects the day and time the sample must be in the testing laboratory to begin the testing process and includes any specimen preparation and processing time required before the test is performed. Some tests are listed as continuously performed, which means assays are performed several times during the day.
Tuesday, Thursday; 3 p.m.
Analytic Time Defines the amount of time it takes the laboratory to setup and perform the test. This is defined in number of days. The shortest interval of time expressed is "same day/1 day," which means the results may be available the same day that the sample is received in the testing laboratory. One day means results are available 1 day after the sample is received in the laboratory.
Maximum Laboratory Time Defines the maximum time from specimen receipt at Mayo Medical Laboratories until the release of the test result
Specimen Retention Time Outlines the length of time after testing that a specimen is kept in the laboratory before it is discarded
Performing Laboratory Location The location of the laboratory that performs the test
Test Classification Provides information regarding the medical device classification for laboratory test kits and reagents. Tests may be classified as cleared or approved by the US Food and Drug Administration (FDA) and used per manufacturer's instructions, or as products that do not undergo full FDA review and approval, and are then labeled as an Analyte Specific Reagent (ASR), Investigation Use Only (IUO) product, or a Research Use Only (RUO) product.
This test was developed and its performance characteristics determined by Mayo Clinic in a manner consistent with CLIA requirements. This test has not been cleared or approved by the U.S. Food and Drug Administration.
CPT Code Information Provides guidance in determining the appropriate Current Procedural Terminology (CPT) code(s) information for each test or profile. The listed CPT codes reflect Mayo Medical Laboratories interpretation of CPT coding requirements. It is the responsibility of each laboratory to determine correct CPT codes to use for billing.
LOINC® Code Information Provides guidance in determining the Logical Observation Identifiers Names and Codes (LOINC) values for the result codes returned for this test or profile.
|Result ID||Reporting Name||LOINC Code|
|8080||Manganese, 24 Hr, U||8203-2|