Test ID: PHBF
Phosphorus, Body Fluid
Secondary ID 
A test code used for billing and in test definitions created prior to November 2011
8029
NY State Approved Indicates the status of NY State approval and if the test is orderable for NY State clients.
Yes
Useful For Suggests clinical disorders or settings where the test may be helpful
Not established
Method Name A short description of the method used to perform the test
Photometric, Ammonium Molybdate
Reporting Name A shorter/abbreviated version of the Published Name for a test; an abbreviated test name
Phosphorus, BF
Aliases Lists additional common names for a test, as an aid in searching
Phosphate
PO4
PO4
Specimen Type Describes the specimen type needed for testing
Body Fluid
Specimen Required Defines the optimal specimen. This field describes the type of specimen required to perform the test and the preferred volume to complete testing. The volume allows automated processing, fastest throughput and, when indicated, repeat or reflex testing.
Container/Tube: Sterile container
Specimen Volume: 1 mL
Collection Instructions: Centrifuge to remove any cellular material.
Additional Information: Indicate specimen source.
Specimen Minimum Volume Defines the amount of specimen required to perform an assay once, including instrument and container dead space. Submitting the minimum specimen volume makes it impossible to repeat the test or perform confirmatory or perform reflex testing. In some situations, a minimum specimen volume may result in a QNS (quantity not sufficient) result, requiring a second specimen to be collected.
0.5 mL
Reject Due To Identifies specimen types and conditions that may cause the specimen to be rejected
| Hemolysis | Mild OK; Gross reject |
| Lipemia | NA |
| Icterus | NA |
| Other | Spinal fluid |
Specimen Stability Information Provides a description of the temperatures required to transport a specimen to the laboratory. Alternate acceptable temperature(s) are also included.
| Specimen Type | Temperature | Time |
|---|---|---|
| Body Fluid | Refrigerated (preferred) | 7 days |
| Frozen | 365 days |
Clinical Information Discusses physiology, pathophysiology, and general clinical aspects, as they relate to a laboratory test
Not available
Reference Values Describes reference intervals and additional information for interpretation of test results. May include intervals based on age and sex when appropriate. Intervals are Mayo-derived, unless otherwise designated. If an interpretive report is provided, the reference value field will state this.
Not Applicable
Interpretation Provides information to assist in interpretation of the test results
None available
Cautions Discusses conditions that may cause diagnostic confusion, including improper specimen collection and handling, inappropriate test selection, and interfering substances
None available
Clinical Reference Provides recommendations for further in-depth reading of a clinical nature
Tietz Textbook of Clinical Chemistry. Edited by Burtis and Ashwood.
Philadelphia, WB Saunders Co, 1994
Method Description Describes how the test is performed and provides a method-specific reference
The method is based on the reaction of phosphate with ammonium
molybdate to form ammonium phosphomolybdate (without reduction).
The addition of an accelerator gives rise to a more rapid rate of reaction.
Specimen blanking yields more precise results. (Package insert, Roche
Phosphorus reagent. Roche Diagnostics Corp., Indianapolis, IN, 1999)
Day(s) and Time(s) Test Performed Outlines the days and times the test is performed. This field reflects the day and time the sample must be in the testing laboratory to begin the testing process and includes any specimen preparation and processing time required before the test is performed. Some tests are listed as continuously performed, which means assays are performed several times during the day.
Monday through Sunday; Continuously
Analytic Time Defines the amount of time it takes the laboratory to setup and perform the test. This is defined in number of days. The shortest interval of time expressed is "same day/1 day," which means the results may be available the same day that the sample is received in the testing laboratory. One day means results are available 1 day after the sample is received in the laboratory.
Same day/1 day
Maximum Laboratory Time Defines the maximum time from specimen receipt at Mayo Medical Laboratories until the release of the test result
2 days
Specimen Retention Time Outlines the length of time after testing that a specimen is kept in the laboratory before it is discarded
1 week
Performing Laboratory Location The location of the laboratory that performs the test
Rochester
Test Classification Provides information regarding the medical device classification for laboratory test kits and reagents. Tests may be classified as cleared or approved by the US Food and Drug Administration (FDA) and used per manufacturer's instructions, or as products that do not undergo full FDA review and approval, and are then labeled as an Analyte Specific Reagent (ASR), Investigation Use Only (IUO) product, or a Research Use Only (RUO) product.
This test has been modified from the manufacturer’s instructions. Its performance characteristics were determined by Mayo Clinic in a manner consistent with CLIA requirements.
CPT Code Information Provides guidance in determining the appropriate Current Procedural Terminology (CPT) code(s) information for each test or profile. The listed CPT codes reflect Mayo Medical Laboratories interpretation of CPT coding requirements. It is the responsibility of each laboratory to determine correct CPT codes to use for billing.
84100
LOINC® Code Information Provides guidance in determining the Logical Observation Identifiers Names and Codes (LOINC) values for the result codes returned for this test or profile.
| Result ID | Reporting Name | LOINC Code |
|---|---|---|
| PHOBF | Phosphorus, BF | 12242-4 |
| FLD20 | Fluid Type | 14725-6 |
External
link
PDF
document
Excel
document
Word
document