Test ID: CACTS
Carnitine-Acylcarnitine Translocase Deficiency, Full Gene Analysis
NY State Approved 
Indicates the status of NY State approval and if the test is orderable for NY State clients.
Useful For Suggests clinical disorders or settings where the test may be helpful
Confirmation of diagnosis of carnitine-acylcarnitine translocase (CACT) deficiency
Carrier screening in cases where there is a family history of CACT deficiency, but disease-causing mutations have not been identified in an affected individual
Genetics Test Information Provides information that may help with selection of the correct test or proper submission of the test request
Not Applicable
Reflex Tests Lists test(s) that may or may not be performed, at an additional charge, depending on the result and interpretation of the initial test(s)
| Test ID | Reporting Name | Available Separately | Always Performed |
|---|---|---|---|
| FBC | Fibroblast Culture for Genetic Test | Yes | No |
Testing Algorithm Delineates situation(s) when tests are added to the initial order. This includes reflex and additional tests.
If skin biopsy is received, fibroblast culture for genetic test will be added and changed separately.
Special Instructions and Forms Describes specimen collection and preparation information, test algorithms, and other information pertinent to test. Also includes pertinent information and consent forms to be used when requesting a particular test
Method Name A short description of the method used to perform the test
Polymerase Chain Reaction (PCR) Followed by DNA Sequence Analysis
(PCR is utilized pursuant to a license agreement with Roche Molecular Systems, Inc.)
Reporting Name A shorter/abbreviated version of the Published Name for a test; an abbreviated test name
Aliases Lists additional common names for a test, as an aid in searching
Specimen Type Describes the specimen type needed for testing
Specimen Required Defines the optimal specimen. This field describes the type of specimen required to perform the test and the preferred volume to complete testing. The volume allows automated processing, fastest throughput and, when indicated, repeat or reflex testing.
Forms:
1. Molecular Genetics-Biochemical Disorders Patient Information Sheet (Supply T527) in Special Instructions
2. New York Clients-Informed consent is required. Please document on the request form or electronic order that a copy is on file. An Informed Consent for Genetic Testing (Supply T576) is available in Special Instructions.
Specimen must arrive within 96 hours of collection.
Submit only 1 of the following specimens:
Preferred:
Specimen Type: Whole blood
Container/Tube:
Preferred: Lavender top (EDTA) or yellow top (ACD)
Acceptable: Any anticoagulant
Specimen Volume: 3 mL
Collection Instructions:
1. Invert several times to mix blood.
2. Send specimen in original tube.
Specimen Stability Information: Ambient (preferred)/Refrigerated
Specimen Type: Cultured fibroblasts
Container/Tube: T-75 or T-25 flask
Specimen Volume: 1 full T-75 or 2 full T-25 flasks
Specimen Stability Information: Ambient (preferred)/Refrigerated <24 hours
Specimen Type: Skin biopsy
Container/Tube: Sterile container with any standard cell culture media (eg, minimal essential media, RPMI 1640). The solution should be supplemented with 1% penicillin and streptomycin. Tubes can be supplied upon request (Eagle's minimum essential medium with 1% penicillin and streptomycin [Supply T115]).
Specimen Volume: 4-mm punch
Specimen Stability Information: Refrigerated (preferred)/Ambient
Acceptable:
Specimen Type: Blood spot
Container/Tube: Whatman Protein Saver 903 Paper
Specimen Volume: 5 blood spots
Collection Instructions:
1. Let blood dry on the filter paper at ambient temperature in a horizontal position for 3 hours.
2. Do not expose specimen to heat or direct sunlight.
3. Do not stack wet specimens.
4. Keep specimen dry.
Specimen Stability Information: Ambient (preferred)/Refrigerated
Specimen Minimum Volume Defines the amount of specimen required to perform an assay once, including instrument and container dead space. Submitting the minimum specimen volume makes it impossible to repeat the test or perform confirmatory or perform reflex testing. In some situations, a minimum specimen volume may result in a QNS (quantity not sufficient) result, requiring a second specimen to be collected.
Reject Due To Identifies specimen types and conditions that may cause the specimen to be rejected
| Hemolysis | NA |
| Lipemia | NA |
| Icterus | NA |
| Other | Plasma or serum |
Specimen Stability Information Provides a description of the temperatures required to transport a specimen to the laboratory. Alternate acceptable temperature(s) are also included.
| Specimen Type | Temperature | Time |
|---|---|---|
| Varies | Varies | |
Clinical Information Discusses physiology, pathophysiology, and general clinical aspects, as they relate to a laboratory test
Carnitine-acylcarnitine translocase (CACT) deficiency is a rare autosomal recessive disorder of fatty acid oxidation. The disease typically presents in the neonatal period with severe hypoketotic hypoglycemia, hyperammonemia, cardiac abnormalities, hepatic dysfunction, skeletal muscle weakness, encephalopathy, and early death. However, presentations at a later age with a milder phenotype have also been reported.
Initial screening can be done with plasma acylcarnitines. Definitive diagnosis can be made by detection of reduced CACT enzyme activity. Mutations in the SLC25A20 gene are responsible for CACT deficiency, and sequencing of this gene is recommended after positive biochemical analysis.
Reference Values Describes reference intervals and additional information for interpretation of test results. May include intervals based on age and sex when appropriate. Intervals are Mayo-derived, unless otherwise designated. If an interpretive report is provided, the reference value field will state this.
An interpretive report will be provided.
Cautions Discusses conditions that may cause diagnostic confusion, including improper specimen collection and handling, inappropriate test selection, and interfering substances
A small percentage of individuals who are carriers or have a diagnosis of carnitine-acylcarnitine translocase (CACT) deficiency may have a mutation that is not identified by this method (eg, promoter and deep intronic mutations). The absence of a mutation, therefore, does not eliminate the possibility of positive carrier status or the diagnosis of CACT deficiency.
In some cases, DNA alterations of undetermined significance may be identified.
Rare polymorphisms exist that could lead to false-negative or false-positive results. If results obtained do not match the clinical and biochemical findings, additional testing should be considered.
A previous bone marrow transplant from an allogenic donor will interfere with testing. Call Mayo Medical Laboratories for instructions for testing patients who have received a bone marrow transplant.
Test results should be interpreted in the context of clinical findings, family history, and other laboratory data. Errors in our interpretation of results may occur if information given is inaccurate or incomplete.
Clinical Reference Provides recommendations for further in-depth reading of a clinical nature
1. Wang GL, Wang J, Douglas G, et al: Expanded molecular features of carnitine acyl-carnitine translocase (CACT) deficiency by comprehensive molecular analysis. Mol Genet Metab 2011 Aug;103(4):349-357
2. Rubio-Gozalbo ME, Bakker, JA, Waterham, HR, Wanders RJA: Carnitine-acylcarnitine translocase deficiency, clinical, biochemical and genetic aspects. Mol Aspects Med 2004 Oct-Dec;25(5-6):521-532
Method Description Describes how the test is performed and provides a method-specific reference
DNA sequencing is utilized to test for the presence of a mutation in all 9 exons of the SLC25A20 gene.(Unpublished Mayo method)
Day(s) and Time(s) Test Performed Outlines the days and times the test is performed. This field reflects the day and time the sample must be in the testing laboratory to begin the testing process and includes any specimen preparation and processing time required before the test is performed. Some tests are listed as continuously performed, which means assays are performed several times during the day.
Monday; 10 am
Analytic Time Defines the amount of time it takes the laboratory to setup and perform the test. This is defined in number of days. The shortest interval of time expressed is "same day/1 day," which means the results may be available the same day that the sample is received in the testing laboratory. One day means results are available 1 day after the sample is received in the laboratory.
Maximum Laboratory Time Defines the maximum time from specimen receipt at Mayo Medical Laboratories until the release of the test result
Specimen Retention Time Outlines the length of time after testing that a specimen is kept in the laboratory before it is discarded
Performing Laboratory Location The location of the laboratory that performs the test
Test Classification Provides information regarding the medical device classification for laboratory test kits and reagents. Tests may be classified as cleared or approved by the US Food and Drug Administration (FDA) and used per manufacturer's instructions, or as products that do not undergo full FDA review and approval, and are then labeled as an Analyte Specific Reagent (ASR), Investigation Use Only (IUO) product, or a Research Use Only (RUO) product.
CPT Code Information Provides guidance in determining the appropriate Current Procedural Terminology (CPT) code(s) information for each test or profile. The listed CPT codes reflect Mayo Medical Laboratories interpretation of CPT coding requirements. It is the responsibility of each laboratory to determine correct CPT codes to use for billing.
81479-Unlisted molecular pathology procedure
LOINC® Code Information Provides guidance in determining the Logical Observation Identifiers Names and Codes (LOINC) values for the result codes returned for this test or profile.
| Result ID | Reporting Name | LOINC Code |
|---|---|---|
| 33338 | Specimen | N/A |
| 33339 | Specimen ID | N/A |
| 33340 | Source | N/A |
| 33341 | Order Date | N/A |
| 33342 | Reason for Referral | N/A |
| 33343 | Method | N/A |
| 33344 | Result | N/A |
| 33345 | Interpretation | N/A |
| 33346 | Amendment | N/A |
| 33347 | Reviewed By | N/A |
| 33348 | Release Date | N/A |
External
link
PDF
document
Excel
document
Word
document