Test ID: FROPI
Ropivacaine, Serum/Plasma
Secondary ID 
A test code used for billing and in test definitions created prior to November 2011
NY State Approved Indicates the status of NY State approval and if the test is orderable for NY State clients.
Method Name A short description of the method used to perform the test
Gas Chromatography (GC)
Reporting Name A shorter/abbreviated version of the Published Name for a test; an abbreviated test name
Aliases Lists additional common names for a test, as an aid in searching
Specimen Type Describes the specimen type needed for testing
Specimen Required Defines the optimal specimen. This field describes the type of specimen required to perform the test and the preferred volume to complete testing. The volume allows automated processing, fastest throughput and, when indicated, repeat or reflex testing.
Submit only 1 of the following specimens:
Serum
Draw blood in a plain, red-top tube(s).
(Serum gel tube is not acceptable.) Spin down and send
1 mL serum refrigerate in plastic vial.
Note: 1. Indicate serum on request form.
2. Label specimen appropriately (serum).
Plasma
Draw blood in a lavender-top (EDTA) tube(s).
(Plasma gel tube is not acceptable.) Spin down and send
1 mL plasma refrigerate in plastic vial.
Note: 1. Indicate plasma a request form.
2. Label specimen appropriately (plasma).
Specimen Minimum Volume Defines the amount of specimen required to perform an assay once, including instrument and container dead space. Submitting the minimum specimen volume makes it impossible to repeat the test or perform confirmatory or perform reflex testing. In some situations, a minimum specimen volume may result in a QNS (quantity not sufficient) result, requiring a second specimen to be collected.
Reject Due To Identifies specimen types and conditions that may cause the specimen to be rejected
Specimens Other Than: serum,plasma
Anticoagulants Other Than: EDTA
Hemolysis: N/A
Thawing: N/A
Lipemia: N/A
Icteric: N/A
Specimen Stability Information Provides a description of the temperatures required to transport a specimen to the laboratory. Alternate acceptable temperature(s) are also included.
| Specimen Type | Temperature | Time |
|---|---|---|
| Varies | Refrigerated (preferred) | 28 days |
| Frozen | 240 days |
Reference Values Describes reference intervals and additional information for interpretation of test results. May include intervals based on age and sex when appropriate. Intervals are Mayo-derived, unless otherwise designated. If an interpretive report is provided, the reference value field will state this.
Following epidural administration 10 mg/hr, 20 mg/hr
and 30 mg/hr, mean plasma concentration of 0.39, 0.88,
1.19 mcg/mL at 21 hours respectively.
Bolus I.V. administration 84 mg/70 kg and 131 mg/70 kg,
peak plasma concentrations of 1.1 and 1.7 mcg/mL at
2 minutes respectively.
Test Performed by: NMS Labs
3701 Welsh Road
P.O. Box 433A
Willow Grove, PA 19090-0437
Day(s) and Time(s) Test Performed Outlines the days and times the test is performed. This field reflects the day and time the sample must be in the testing laboratory to begin the testing process and includes any specimen preparation and processing time required before the test is performed. Some tests are listed as continuously performed, which means assays are performed several times during the day.
Tuesday, Thursday
Analytic Time Defines the amount of time it takes the laboratory to setup and perform the test. This is defined in number of days. The shortest interval of time expressed is "same day/1 day," which means the results may be available the same day that the sample is received in the testing laboratory. One day means results are available 1 day after the sample is received in the laboratory.
Maximum Laboratory Time Defines the maximum time from specimen receipt at Mayo Medical Laboratories until the release of the test result
Performing Laboratory Location The location of the laboratory that performs the test
CPT Code Information Provides guidance in determining the appropriate Current Procedural Terminology (CPT) code(s) information for each test or profile. The listed CPT codes reflect Mayo Medical Laboratories interpretation of CPT coding requirements. It is the responsibility of each laboratory to determine correct CPT codes to use for billing.
82491
LOINC® Code Information Provides guidance in determining the Logical Observation Identifiers Names and Codes (LOINC) values for the result codes returned for this test or profile.
| Result ID | Reporting Name | LOINC Code |
|---|---|---|
| Z2296 | Ropivacaine | 51203-8 |
| Z2297 | Reporting Limit | In Process |
External
link
PDF
document
Excel
document
Word
document