Shiga Toxin, Molecular Detection, PCR, Feces
NY State Approved Indicates the status of NY State approval and if the test is orderable for NY State clients.
Sensitive, specific, and rapid detection of the presence of Shiga toxin-producing organisms such as Escherichia coli O157:H7 and Shigella dysenteriae type 1 in stool
Real-Time Polymerase Chain Reaction (PCR) Using LightCycler and Fluorescent Resonance Energy Transfer (FRET)
(PCR is utilized pursuant to a license agreement with Roche Molecular Systems, Inc.)
Reporting Name A shorter/abbreviated version of the Published Name for a test; an abbreviated test name
Shiga Toxin PCR, F
E. coli O157:H7
Shiga producing E. coli
Shiga producing E. coli
Specimen Type Describes the specimen type needed for testing
Specimen Required Defines the optimal specimen. This field describes the type of specimen required to perform the test and the preferred volume to complete testing. The volume allows automated processing, fastest throughput and, when indicated, repeat or reflex testing.
Submit only 1 of the following specimens:
Specimen Type: Preserved stool
Container/Tube: Commercially available transport system specific for recovery of enteric pathogens from fecal specimens (15 mL of non-nutritive transport medium containing phenol red as a pH indicator, either Cary-Blair or Para-Pak C and S)
Specimen Volume: Representative portion of stool
Specimen Type: Unpreserved stool
Container/Tube: Stool container (Supply T288)
Specimen Volume: Representative portion of stool
Specimen Minimum Volume Defines the amount of specimen required to perform an assay once, including instrument and container dead space. Submitting the minimum specimen volume makes it impossible to repeat the test or perform confirmatory or perform reflex testing. In some situations, a minimum specimen volume may result in a QNS (quantity not sufficient) result, requiring a second specimen to be collected.
Formed stool or stool in gel transport medium
Specimen Stability Information Provides a description of the temperatures required to transport a specimen to the laboratory. Alternate acceptable temperature(s) are also included.
|Fecal||Ambient (preferred)||7 days|
Clinical Information Discusses physiology, pathophysiology, and general clinical aspects, as they relate to a laboratory test
Shiga toxins (also known as Shiga-like toxins, Vero toxins, or Vero-like toxins) are encoded by some strains of Escherichia coli, most notably O157:H7. Shiga toxin can also be produced by other serogroups of enterohemorrhagic Escherichia coli (EHEC), as well as Shigella dysenteriae type 1. Generally, Shiga toxin-producing organisms cause bloody diarrhea, although this is not universal. Unlike some bacterial gastrointestinal infections, antimicrobial therapy is contraindicated, as antimicrobials may exacerbate disease. Treatment is primarily supportive (eg, hydration). A complication of infection by an organism producing Shiga toxin is hemolytic uremic syndrome (HUS). The percentage of people that develop HUS varies among outbreaks of Escherichia coli O157:H7, but generally ranges from 3% to 20%. HUS is characterized by a triad of findings: hemolytic anemia, thrombocytopenia, and kidney failure. Most people recover completely, however, some require permanent dialysis, and some die as a result of complications.
Several diagnostic methods available for the detection of EHEC lack sensitivity, are labor intensive, or have a long turnaround time. There are more than 160 serogroups of EHEC; the first serogroup to be associated with HUS was O157:H7. This is also the serogroup that is most commonly implicated in outbreaks. EHEC O157:H7 is detectable as nonfermenting colonies when cultured on sorbitol MacConkey (SMAC) agar, but the majority of non-O157:H7 Shiga toxin-producing Escherichia coli strains ferment sorbitol and, therefore, are undetectable by this method. The Vero cell line is susceptible to the Shiga toxin, but the assay can take up to 48 hours and is nonspecific. Commercial enzyme-linked immunosorbent assay (ELISA) antigen detection kits have a sensitivity of 90% when compared to culture, but an overnight enrichment step is necessary for adequate sensitivity. PCR detection of stx, the gene encoding Shiga toxin, directly from stool specimens is a sensitive and specific technique, providing same-day results. PCR assay identifies non-O157:H7 Shiga toxin-producing bacteria, extending the utility beyond strains identifiable on SMAC agar.
Reference Values Describes reference intervals and additional information for interpretation of test results. May include intervals based on age and sex when appropriate. Intervals are Mayo-derived, unless otherwise designated. If an interpretive report is provided, the reference value field will state this.
A positive PCR result indicates the likely presence of Shiga toxin-producing Escherichia coli in the specimen. Although Shigella dysenteriae serotype 1 may produce a positive result, it is extremely rare in the United States. A negative result indicates the absence of detectable Shiga toxin DNA in the specimen, but does not rule out the presence of Shiga toxin-producing Escherichia coli, as false-negative results may occur due to inhibition of PCR, sequence variability underlying the primers and probes, or the presence of the Shiga toxin gene in quantities less than the limit of detection of the assay. Shiga toxins are encoded on mobile genetic elements and can theoretically be lost by their bacterial host.
Cautions Discusses conditions that may cause diagnostic confusion, including improper specimen collection and handling, inappropriate test selection, and interfering substances
Interfering substances in stool may affect the accuracy of this assay; results should always be interpreted in conjunction with clinical and epidemiological findings.
This assay detects stx subtypes stx1, stx2, stx2c, and stx2d. It does not detect stx2e or stx2f which are seldom associated with human disease.
This assay was prospectively clinically validated using 204 stool specimens submitted for the antigen test (EIA method). In addition, the assay was used to test 85 archived fecal specimens previously tested for either Escherichia coli O157:H7 or Shiga toxin by EIA, with results compared to the prior results. Discordant results on the archived specimens were resolved by submission to the Minnesota Department of Health (MDH) for PCR using different primers. Compared to a combined gold standard (ie, positive by EIA, culture, or MDH PCR) the Mayo PCR assay had 100% sensitivity and specificity; in total, 46 positive and 243 negative specimens were evaluated. No cross-reactivity was observed when tested on a panel of more than 50 organisms commonly found in stool. The analytical sensitivity was 2 targets/mcL.
Clinical Reference Provides recommendations for further in-depth reading of a clinical nature
1. Gould LH, Bopp C: Recommendations for diagnosis of Shiga toxin-producing Escherichia coli infection by clinical laboratories. MMWR Morb Mortal Wkly Rep 2009 Oct;16:v58
2. Grys TE, Sloan LM, Rosenblatt JE, Patel R: Rapid and sensitive detection of Shiga toxin-producing Escherichia coli from nonenriched stool specimens by real-time PCR in comparison to enzyme immunoassay and culture. J Clin Microbiol 2009;47:2008-2012
3. Grys TE, Patel R: Update on Shiga toxin-producing Escherichia coli. Mayo Clinic, Mayo Medical Laboratories Communique
4. Nyre LM, Kiemele DL, Zomok CD, et al: Clinical experience with rapid PCR for detection of Shiga toxin in stool. Abstract of the Annual Meeting of the American Society for Microbiology, 2010 General Meeting, San Diego, CA, May 23-27, 2010
Method Description Describes how the test is performed and provides a method-specific reference
This method employs a target-specific detection system including PCR primers, as well as fluorescent resonance energy transfer (FRET) hybridization probes designed for the stx1 and stx2 genes. The LightCycler instrument amplifies and monitors target nucleic acid sequences by fluorescence during PCR cycling. This is an automated PCR system that can rapidly detect amplified product development. The detection of amplified products is based on the FRET principle. For FRET product detection, a hybridization probe with a donor fluorophore, fluorescein, on the 3' end is excited by an external light source, which emits light that is absorbed by a second hybridization probe with an acceptor fluorophore, LC-Red 640, at the 5' end. The acceptor fluorophore then emits a light of a different wavelength that is measured with a signal that is proportional to the amount of specific PCR product. The process is completed in a closed tube system.(Grys TE, Sloan LM, Rosenblatt JE, Patel R: Rapid and sensitive detection of Shiga toxin-producing Escherichia coli from nonenriched stool specimens by real-time PCR in comparison to enzyme immunoassay and culture. J Clin Microbiol 2009;47:2008-2012)
Day(s) and Time(s) Test Performed Outlines the days and times the test is performed. This field reflects the day and time the sample must be in the testing laboratory to begin the testing process and includes any specimen preparation and processing time required before the test is performed. Some tests are listed as continuously performed, which means assays are performed several times during the day.
Monday through Sunday, once daily
Analytic Time Defines the amount of time it takes the laboratory to setup and perform the test. This is defined in number of days. The shortest interval of time expressed is "same day/1 day," which means the results may be available the same day that the sample is received in the testing laboratory. One day means results are available 1 day after the sample is received in the laboratory.
Maximum Laboratory Time Defines the maximum time from specimen receipt at Mayo Medical Laboratories until the release of the test result
Specimen Retention Time Outlines the length of time after testing that a specimen is kept in the laboratory before it is discarded
Performing Laboratory Location The location of the laboratory that performs the test
Test Classification Provides information regarding the medical device classification for laboratory test kits and reagents. Tests may be classified as cleared or approved by the US Food and Drug Administration (FDA) and used per manufacturer's instructions, or as products that do not undergo full FDA review and approval, and are then labeled as an Analyte Specific Reagent (ASR), Investigation Use Only (IUO) product, or a Research Use Only (RUO) product.
This test was developed and its performance characteristics determined by Mayo Clinic in a manner consistent with CLIA requirements. This test has not been cleared or approved by the U.S. Food and Drug Administration.
CPT Code Information Provides guidance in determining the appropriate Current Procedural Terminology (CPT) code(s) information for each test or profile. The listed CPT codes reflect Mayo Medical Laboratories interpretation of CPT coding requirements. It is the responsibility of each laboratory to determine correct CPT codes to use for billing.
LOINC® Code Information Provides guidance in determining the Logical Observation Identifiers Names and Codes (LOINC) values for the result codes returned for this test or profile.
|Result ID||Reporting Name||LOINC Code|